Mr. Vinod Vanarse | Nano Fluidic Awards |

Posted on by ScienceFather

Mr. Vinod Vanarse | Nano Fluidic Awards | Best Researcher Award

Mr. Vinod Vanarse , Indian Institute of Technology Guwahati , India

Vinod B. Vanarse is a dedicated Ph.D. candidate in Chemical Engineering at the Indian Institute of Technology, Guwahati, specializing in field-induced interfacial instabilities in open-confined µ-systems. He holds an M.Tech in Chemical Engineering from NIT Durgapur and a B.E. in Chemical Engineering from JNEC, Aurangabad. With significant industry experience, Vinod has worked as a Senior Executive in the Crop Protection Division at ATUL Ltd. and as a Jr. Executive in the Solvent Recovery Division at Hospira Healthcare Pvt. Ltd. His research contributions include several high-impact publications and presentations at international conferences. Proficient in various programming and simulation software, Vinod also has extensive experience with analytical instruments. He has been a Teaching Assistant for multiple courses, demonstrating his commitment to both research and education in the field of chemical engineering.

Professional Profile:

Google Scholar

Summary of Suitability for the Research for Best Researcher Award

  • Innovative Research: Vinod is actively pursuing a Ph.D. in Chemical Engineering at IIT Guwahati, focusing on “Field-Induced Interfacial Instabilities in Open-Confined µ-Systems,” showcasing his ability to tackle complex, cutting-edge problems.
  • Significant Publications: His work has been published in high-impact journals such as Physics of Fluids, Industrial & Engineering Chemistry Research, and Processes. Notable papers include investigations into instability modes at solvent/non-solvent interfaces and electroosmotic micromixing in patterned microchannels.
  • Conference Presentations: Vanarse has presented his research at prestigious conferences including the BIFD-2024 in Scotland and the Indo-German Workshop-2024. His work on microdroplet sensors and mesoscopic structures in porous media underscores his research’s impact and relevance.

🎓Education:

Vinod B. Vanarse is currently pursuing a Ph.D. in Chemical Engineering at the Indian Institute of Technology, Guwahati, where he focuses on “Field-Induced Interfacial Instabilities in Open-Confined µ-Systems” under the guidance of Prof. Dipankar Bandyopadhyay and Prof. T. K. Mandal. He holds an M.Tech in Chemical Engineering from NIT Durgapur, achieved with a CGPA of 8.63. His foundational education includes a B.E. in Chemical Engineering from JNEC, Aurangabad, with a percentage of 67%. Vinod completed his Higher Secondary Certificate (HSC) with 66.0% from the HSC Board, Pune, and his Secondary School Certificate (SSC) with 79.60% from the SSC Board, Pune.

🏢Work Experience:

Vinod B. Vanarse worked as a Senior Executive in the Production (Crop Protection) Division at ATUL Ltd. in Valsad, Gujarat, from January 2015 to December 2016. In this role, he served as the Technical Team Lead for Product Formulation and managed the Legal Advisory Committee. Prior to this, he was a Jr. Executive in the Production (Solvent Recovery (SRP)) Division at Hospira Healthcare Pvt. Ltd. in Aurangabad, Maharashtra, from August 2012 to December 2014. His responsibilities there included overseeing distillation operations, acting as Shift-Incharge, and leading the Safety Team.

Publication Top Notes:

  • Coupled instability modes at a solvent/non-solvent interface to decorate cellulose acetate flowers

    Cited by: 2

  • Electroosmotic Micromixing in Physicochemically Patterned Microchannels

    Cited by: 1

  • Controlled Micro–Nano-Scale Droplet Generation via Spin Dewetting
  • Forming flower-like fingers with fluid instabilities
  • Microdroplet sensor for point-of-care-testing of glycemic index using gold-amylase nanocomposite

 

 

 

Dr. Gyungtae Kim | Nanoscale Awards | Excellence in Research

Posted on by ScienceFather

Dr. Gyungtae Kim | Nanoscale Awards | Excellence in Research

Dr. Gyungtae Kim ,National nanofab center , South Korea

Gyungtae Kim is a principal researcher at the National Nanofab Center in the Department of Measurement & Analysis, specializing in nanoscale characterization and surface analysis. Born on July 17, 1977, in South Korea, he earned his Ph.D. in Electronics, Radio Sciences & Engineering and Information Communications from Chungnam National University in February 2016. He has extensive experience in the semiconductor industry, having worked as a senior engineer at SK Hynix from 2004 to 2011 before joining the National Nanofab Center. Over his 13-year research career, he has contributed significantly to the field of semiconductor metrology, with key expertise in surface and X-ray analysis. His research has resulted in numerous publications in high-impact journals and involvement in several high-profile projects. Gyungtae is also an active member of several academic committees and has presented his work at major international conferences.

Professional Profile:

Google Scholar

Suitability for Excellence in Research Award: Gyungtae Kim

Gyungtae Kim is a highly qualified researcher with extensive experience in the field of nanoscale characterization. His educational background, professional experience, and significant contributions to research and development make him a strong candidate for the Excellence in Research Award.

🎓Education:

Gyungtae Kim holds a Ph.D. in Electronics, Radio Sciences & Engineering and Information Communications from Chungnam National University, completed in February 2016. His doctoral thesis, titled “Reliable Electro-Thermal Modeling and Characterization for Highly Uniform Amorphous-Silicon Microbolometer,” was supervised by Prof. Hyoungho Ko. Prior to his Ph.D., he earned a Master’s degree in the same field from Chungnam National University in February 2014. He also holds a Bachelor’s degree in Electronics Engineering from Inha University, which he completed in February 2004.

🏢Work Experience:

Gyungtae Kim is a Principal Researcher in the Department of Measurement & Analysis at the National Nanofab Center, a position he has held since 2016. His key experiences in this role include surface analysis, X-ray analysis, and semiconductor metrology. Prior to this, he served as a Senior Researcher in the Semiconductor Device Department at the same institution from 2011 to 2016. Before joining the National Nanofab Center, Gyungtae worked as a Senior Engineer at SK Hynix from 2004 to 2011, where he gained substantial industry experience.

🏅Conferences and Presentations:

Gyungtae has presented his work at major international conferences such as the European Conference on X-ray Spectrometry (EXRS) and the Korean Physical Society (KPS) Fall Meeting, among others. His contributions to these conferences have focused on advancements in semiconductor metrology and surface analysis techniques

 

Publication Top Notes:

  • Nano-mapping of vertical contact electrodes using synchrotron scanning photoelectron microscopy
  • Effect of Bias Potential on the Interface of a Solid Electrolyte and Electrode during XPS Depth Profiling Analysis
  • Stabilizing a lithium metal anode through the sustainable release of a multi-functional AgNO3 additive
  • Controlled adsorption of gas molecules by tuning porosity of titanium film
  • Contact holes in vertical electrode structures analyzed by voltage contrast-SEM and conducting AFM

    Cited by: 2

 

Dr. Jie Chen | NanoScale Awards | Best Researcher Award

Posted on by ScienceFather

Dr. Jie Chen | NanoScale Awards | Best Researcher Award

Dr. Jie Chen , Wenzhou University , China

Jie Chen is a highly accomplished researcher and educator with expertise in the field of metallic materials. Holding a Doctoral degree in Materials Forming Engineering, he currently serves as a teacher at Wenzhou University’s College of Mechanical & Electrical Engineering. With a rich academic background spanning from Shenyang University of Technology to Northeastern University, Jie has honed his skills in materials forming and control engineering, culminating in a focus on the preparation and processing of high-quality metal materials. Throughout his career, he has led numerous research projects, authored 12 academic papers, and secured over 10 invention patents. His research interests primarily revolve around laser processing technology for metallic materials, including surface heat treatment, cladding, and cutting, as well as the exploration of new metal materials through composition design and microstructure control. Jie Chen’s dedication to advancing the understanding and application of metallic materials underscores his commitment to innovation and academic excellence.

Professional Profile:

Orcid

Education:

Jie Chen pursued his academic journey with unwavering dedication, earning his Bachelor’s Degree in Materials Forming and Control Engineering from the School of Materials Science and Engineering at Shenyang University of Technology, where he studied from September 2009 to July 2013. Building upon this foundation, he continued his pursuit of knowledge by completing his Master’s Degree in Materials Forming Engineering at the esteemed State Key Laboratory of Rolling and Automation, Northeastern University, from September 2013 to July 2015. Driven by a passion for research and innovation, Jie further advanced his studies and attained his Doctorate in Materials Forming Engineering from the same institution, Northeastern University, from September 2015 to July 2019. Through these academic endeavors, Jie Chen honed his expertise in the preparation, microstructure, and properties of high-quality metallic materials, laying the groundwork for his impactful contributions to the field

Work Experience:

Since October 2019, Jie Chen has been serving as a dedicated teacher at the College of Mechanical & Electrical Engineering, Wenzhou University. In this role, he brings his extensive academic background and research expertise to the forefront, nurturing the next generation of engineers and scientists. Through his teaching, Jie imparts valuable knowledge and insights garnered from his own academic journey, inspiring students to explore the intricate world of materials science and engineering. His commitment to excellence and passion for education resonate in his interactions with students, fostering a dynamic and enriching learning environment. As a teacher, Jie Chen plays a pivotal role in shaping the future of mechanical and electrical engineering at Wenzhou University, instilling in his students the skills, knowledge, and passion needed to thrive in the field.

Publication Top Notes:

  • Revealing the Enhancement Mechanism of Laser Cutting on the Strength–Ductility Combination in Low Carbon Steel
    • Journal: Metals
    • Published Date: 2024-05-02
  • Revealing the strength and toughness mechanisms of ductile iron in three heat‐treatment processes
    • Journal: Materialwissenschaft und Werkstofftechnik
    • Published Date: 2024-04
  • Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy
    • Journal: Materials Science and Engineering: A
    • Published Date: 2022-04
  • Evaluation of microstructure and mechanical properties of Fe–1.2Mn–0.3Cr–1.4Ni–0.4Mo–C steel welded joints
    • Journal: Journal of Materials Research and Technology
    • Published Date: 2020-11
  • Strength and toughness of Fe-1.2Mn-0.3Cr-1.4Ni-0.4Mo-C tempered steel plate in three cooling processes
    • Journal: Materials Science and Engineering: A
    • Published Date: 2019-04