Dr. Pengwei Xiao | Nanocomposites Awards | Best Researcher Award

Posted on by ScienceFather

Dr. Pengwei Xiao | Nanocomposites Awards | Best Researcher Award

Dr. Pengwei Xiao , MGH/Harvard Medical School , United States

Dr. Pengwei Xiao is a Post-Doctoral Research Fellow at the Department of Orthopaedic Surgery, Massachusetts General Hospital/Harvard Medical School, Harvard University, where he leads cutting-edge research on knee biomechanics and total joint arthroplasty. He holds a Ph.D. in Mechanical Engineering from the University of Texas at San Antonio, where he conducted advanced research on bone biomechanics and fracture risk prediction using AI-assisted modeling techniques. Dr. Xiao also holds an M.Sc. in Engineering Mechanics from Jinan University and a B.Sc. from South China University of Technology. His work integrates computational methods, experimental research, and machine learning to advance orthopaedic surgery and bone health.

Professional Profile:

Orcid

Summary of Suitability for Best Researcher Award: Dr. Pengwei Xiao

Dr. Pengwei Xiao is a highly qualified candidate for the Best Researcher Award, given his extensive experience, innovative research contributions, and leadership in the field of biomechanics and orthopaedic surgery.

🎓Education:

Dr. Pengwei Xiao earned his Ph.D. in Mechanical Engineering from the University of Texas at San Antonio in December 2022. Prior to that, he completed his Master of Science (M.Sc.) in Engineering Mechanics at Jinan University in Guangzhou, China, in June 2010. He also holds a Bachelor of Science (B.Sc.) in Engineering Mechanics from South China University of Technology, Guangzhou, China, which he obtained in June 2008

🏢Work Experience:

Dr. Pengwei Xiao is currently a Post-Doctoral Research Fellow in the Department of Orthopaedic Surgery at Massachusetts General Hospital/Harvard Medical School, where he has been leading research since January 2024 on knee biomechanics, total joint arthroplasty, and integrating machine learning models into clinical workflows. Simultaneously, he serves as a part-time Post-Doctoral Research Fellow at the Mechanics of Biological Materials/Structures Lab at the University of Texas at San Antonio, focusing on methods to predict bone fragility fracture risks and conducting advanced research on bone microstructure. From January to December 2023, Dr. Xiao was a full-time Post-Doctoral Research Fellow at the same lab, where he conducted research on bone nanomechanics, finite element modeling, and AI-assisted predictions of bone fragility fractures. His research journey began as a Research Assistant at the Mechanics of Biological Materials/Structures Lab at UT San Antonio, where, from August 2018 to December 2022, he developed probability-based models and deep learning techniques to assess bone structure-function relationships and fracture risks.

Publication Top Notes:

  • “Socioeconomic Area Deprivation Index is Not Associated with Postoperative Complications Following Revision Total Hip and Knee Joint Arthroplasty”
  • “Characterization of Trabecular Bone Microarchitecture and Mechanical Properties Using Bone Surface Curvature Distributions”
  • “A Novel QCT-Based Deep Transfer Learning Approach for Predicting Stiffness Tensor of Trabecular Bone Cubes”
  • “In-silico Simulation of Nanoindentation on Bone Using a 2D Cohesive Finite Element Model”
  • “Probability-Based Approach for Characterization of Microarchitecture and Its Effect on Elastic Properties of Trabecular Bone”

 

 

 

Dr. Alexandra Portoaca | Nanocomposites Awards | Best Researcher Award

Posted on by ScienceFather

Dr. Alexandra Portoaca | Nanocomposites Awards | Best Researcher Award

Dr. Alexandra Portoaca  , Petroleum-Gas University , Romania

Alexandra-Ileana Portoaca, born on January 21, 1992, is a Romanian Assistant Professor at the Petroleum-Gas University of Ploiesti, specializing in Mechanical Engineering. Since March 2021, she has been engaged in teaching laboratories and seminars on Machine Parts, Hydropneumatic Systems, Computer-Aided Design, and Project Management. Additionally, she conducts research on the mechanical characteristics of 3D-printed parts. Alexandra previously worked as a Process Quality Engineer at Driv Romania, where she was responsible for quality assurance, risk management, and implementing quality improvement strategies in the automotive industry. She holds a Master’s degree in Optimal Exploitation of Oilfield Equipment and a Bachelor’s degree in Economic Engineering in the Mechanical Field from the Petroleum-Gas University of Ploiesti. Alexandra is proficient in English, with basic knowledge of German and intermediate proficiency in Spanish.

Professional Profile:

Orcid

🎓Education:

Alexandra-Ileana Portoaca holds a Master’s Degree in Optimal Exploitation of Oilfield Equipment from the Petroleum-Gas University of Ploiesti, completed between October 1, 2015, and March 14, 2017, where she focused on the optimization of oil equipment, oil equipment logistics, and project management. She also earned a Bachelor’s Degree in Economic Engineering in the Mechanical Field from the same university, studying from October 1, 2011, to July 24, 2015, with a focus on hydraulic machinery, oil equipment, mechanics, management, and material technology. Additionally, Alexandra participated in an Erasmus+ program at the Universidad de Castilla-La Mancha in Spain, where she studied Engineering and Management of Maintenance from September 17, 2014, to February 17, 2015.

🏢Professional Experience:

Since March 1, 2021, Alexandra-Ileana Portoaca has been serving as an Assistant Professor at the Petroleum-Gas University of Ploiesti. In this role, she teaches various subjects, including Machine Parts, Hydropneumatic Systems, Computer-Aided Design, and Project Management. Additionally, she conducts research on the mechanical characteristics of 3D-printed parts.

Publication Top Notes:

  • Experimental investigation on corrosion resistance and tribological properties of steel coated with glass-reinforced polymer
    • Journal: Tribology and Materials
    • Year: 2024
  • Assessment of Environmental Impact on Glass-Fiber-Reinforced Polymer Pipes Mechanical and Thermal Properties
    • Journal: Polymers
    • Year: 2024-06-24
  • Analyzing Sustainable 3D Printing Processes: Mechanical, Thermal, and Crystallographic Insights
    • Journal: Polymers
    • Year: 2024-05-10
  • A Study regarding the Technical-Economical Optimization of Structural Components for enhancing the Buckling Resistance in Stiffened Cylindrical Shells
    • Journal: Engineering, Technology & Applied Science Research
    • Year: 2023
  • Comparison of the Charpy Resilience of Two 3D Printed Materials: A Study on the Impact Resistance of Plastic Parts
    • Journal: Engineering, Technology & Applied Science Research
    • Year: 2023

 

 

 

Mr. Yu-Ming Huang | Nanocomposites Awards | Best Researcher Award

Posted on by ScienceFather

Mr. Yu-Ming Huang | Nanocomposites Awards | Best Researcher Award

Mr. Yu-Ming Huang , National Cheng Kung University , Taiwan

Dr. Yuming Huang is a distinguished professor at National Cheng Kung University in Tainan, Taiwan. Renowned for his contributions to the field of materials science and engineering, Dr. Huang’s research interests span advanced materials, nanotechnology, and sustainable energy solutions. With numerous publications and citations to his name, he has established himself as a leading figure in his domain, contributing significantly to both academic and industrial advancements. Dr. Huang’s work continues to inspire and drive innovation in the global scientific community.

Professional Profile:

Scopus

Education:

Dr. Yu-Ming Huang, born in Tainan, Taiwan, in 1977, received his MS degree in electrical engineering from Southern Taiwan University and his PhD in Engineering Science from the Graduate School of Engineering Science at Osaka University, Japan, in 2008. Since 2009, he has been a post-doctoral fellow at National Cheng Kung University, focusing on research in MEMS and tactile sensor devices.

Work Experience:

Dr. Yu-Ming Huang, born in Tainan, Taiwan, in 1977, received his MS degree in electrical engineering from Southern Taiwan University and his PhD in Engineering Science from the Graduate School of Engineering Science at Osaka University, Japan, in 2008. Since 2009, he has been a post-doctoral fellow at National Cheng Kung University in Tainan, Taiwan. His research primarily focuses on MEMS and tactile sensor devices. Dr. Huang’s work in this area aims to advance the development and application of these technologies, contributing to innovations in various fields that rely on precise and responsive sensor systems.

Publication Top Notes:

  • Implementation of SOPC based Telecom & Datacom for monitoring wireless sensor networks
    • Authors: Chen, H.-C., Huang, Y.-M., Su, C.-H., Chiu, T.-W.
    • Citations: 1
  • Fabrication and performance assessment of a novel stress sensor applied for micro-robotics
    • Authors: Huang, Y.-M., Tsai, N.-C., Lai, J.-Y.
    • Citations: 1
  • Development of tactile sensors for simultaneous detection of normal and shear stresses
    • Authors: Huang, Y.-M., Tsai, N.-C., Lai, J.-Y.
    • Citations: 26
  • Stability improvement of tactile sensor of normal and shear stresses using Ni-Cr thin film gauge
    • Authors: Onishi, H., Sohgawa, M., Tachibana, H., Noda, M., Noma, H.
    • Citations: 22
  • Fabrication and normal/shear stress responses of tactile sensors of polymer/Si cantilevers embedded in PDMS and urethane gel elastomers
    • Authors: Huang, Y.-M., Sohgawa, M., Yamashita, K., Noda, M., Noma, H.
    • Citations: 16

 

 

Prof. Dr. Nuran Ulusoy | Nanocomposites Awards | Best Researcher Award

Posted on by ScienceFather

Prof. Dr. Nuran Ulusoy | Nanocomposites Awards | Best Researcher Award

Prof. Dr. Nuran Ulusoy, Near East University , Cyprus

Prof. Dr. Nuran Ulusoy is a distinguished expert in restorative dentistry, currently serving as Chairperson at the Near East University Faculty of Dentistry in Northern Cyprus. She obtained her DDS in 1973 and her PhD in 1978 from the University of Ankara, Turkey. Dr. Ulusoy began her academic career at Ankara University, where she advanced from Assistant Professor in 1982 to full Professor in 1992. She held significant administrative roles, including Chairperson of Restorative Dentistry and Endodontics at Dicle University and Visiting Professor at the Medical College of Georgia. Since 2010, she has been leading the Department of Restorative Dentistry at Near East University and has been a senate member since 2011.

Professional Profile:

Google Scholar

Education:

Prof. Dr. Nuran Ulusoy, a distinguished expert in restorative dentistry, received her DDS in 1973 and her PhD in 1978 from the University of Ankara Faculty of Dentistry in Turkey. She began her academic career at Ankara University, where she advanced from Assistant Professor in 1982 to Associate Professor in 1986 and then to full Professor in 1992. Dr. Ulusoy has held several significant administrative roles throughout her career, including Chairperson of Restorative Dentistry and Endodontics at Dicle University Faculty of Dentistry from 1987 to 1989, and Visiting Professor at the Medical College of Georgia School of Dentistry in 1989 and 1990. From 1994 to 2010, she served as the Chairperson of Restorative Dentistry at Ankara University Faculty of Dentistry. Since 2010, she has been leading the Department of Restorative Dentistry at Near East University Faculty of Dentistry in Northern Cyprus and has been a senate member since 2011.

Work Experience:

Prof. Dr. Nuran Ulusoy has held various prestigious academic and administrative positions throughout her career. She started as an Assistant Professor at Ankara University Faculty of Dentistry in 1982, progressing to Associate Professor in 1986, and then to full Professor in 1992. Her administrative roles began as Chairperson of Restorative Dentistry and Endodontics at Dicle University Faculty of Dentistry from 1987 to 1989. She then served as a Visiting Professor at the Medical College of Georgia School of Dentistry in the USA in 1989 and 1990. From 1994 to 2010, Dr. Ulusoy was the Chairperson of Restorative Dentistry at Ankara University Faculty of Dentistry. Since 2010, she has been leading the Department of Restorative Dentistry at Near East University Faculty of Dentistry, where she has also been a senate member since 2011.

Publication Top Notes:

 

 

 

Mrs. Stiliyana Stoyanova | Nanotechnology composites Awards | Best Researcher Award

Posted on by ScienceFather

Mrs. Stiliyana Stoyanova | Nanotechnology composites Awards | Best Researcher Award

Mrs. Stiliyana Stoyanova , University of Technology of Compiègne (UTC), France and Institute of Mechanics, BAS, Bulgaria

Stiliyana Stoyanova, a Bulgarian national born on July 4, 1998, is currently pursuing a joint doctoral thesis titled “Hybridly Reinforced Polymers for Smart and Versatile Composite Structures” at the University of Technology of Compiègne (UTC), France, and the Institute of Mechanics, BAS, Bulgaria. She holds a Master’s degree in Chemical Engineering with a specialty in Chemical and Biochemical Engineering in French from the University of Chemical Technology and Metallurgy in Sofia, Bulgaria. Stiliyana’s research focuses on nanocomposites, particularly exploring the thermoresistive and Joule heating properties of polyvinylidene fluoride (PVDF) hybrid nanocomposites with graphene and carbon nanotubes. She has presented her findings at various international conferences and has undertaken scientific missions and training schools in Switzerland and the United States. Fluent in Bulgarian, English (B2), and French (B1), Stiliyana combines her academic rigor with proficiency in digital skills and scientific publications to advance her field of study.

Professional Profile:

Orcid

Education:

Stiliyana Stoyanova, currently engaged in doctoral studies at the University of Technology of Compiègne (UTC) in France, is pursuing research on “Hybridly Reinforced Polymers for Smart and Versatile Composite Structures” in collaboration with the Institute of Mechanics at the Bulgarian Academy of Sciences (BAS). She earned her Master’s degree in Chemical Engineering from the University of Chemical Technology and Metallurgy in Sofia, Bulgaria, specializing in Chemical and Biochemical Engineering in French. Her master’s thesis focused on “Preparation of pH-Sensitive Hydrogels Based on Natural Products.”

Work Experience:

Stiliyana Stoyanova’s scientific research focuses on nanocomposites, particularly exploring the thermoresistive and Joule heating properties of polyvinylidene fluoride (PVDF) hybrid nanocomposites incorporating graphene and carbon nanotubes. She has disseminated her findings at prominent international conferences, including the 3rd Full Action Meeting COST CA 19118-EsSENce in Athens, Greece, where she discussed “Thermoresistive Carbon Nanomaterials (CNM)-Based Nanocomposites and Its Applications.” Stiliyana also presented her research on the effects of carbon nanofillers on the electrical resistivity and crystallinity of PVDF nanocomposites at the 4th Interdisciplinary PhD Forum with an international presence. Fluent in Bulgarian, with English proficiency at B2 level and French at B1 level, she combines her technical expertise with effective communication skills to contribute significantly to her field of study

Publication Top Notes:

PVDF Hybrid Nanocomposites with Graphene and Carbon Nanotubes and Their Thermoresistive and Joule Heating Properties
Journal: Nanomaterials
Year: 2024
Month: May
Type: Journal article
DOI: 10.3390/nano14110901
Contributors: Stiliyana Stoyanova, Evgeni Ivanov, Lohitha R Hegde, Antonia Georgopoulou, Frank Clemens, Fahmi Bedoui, Rumiana Kotsilkova